How To Enter Boot Menu Windows 10

13 min read

Accessing the boot menu in Windows 10 is a fundamental skill for troubleshooting hardware issues, installing a fresh operating system, or running diagnostic tools from a USB drive. Here's the thing — unlike older versions of Windows where hammering the F8 key during startup was the standard method, modern PCs with UEFI firmware and Fast Startup enabled require a few different approaches. Whether you are trying to boot from a recovery drive, change the boot order permanently, or access the BIOS/UEFI settings, understanding these methods will save you significant time and frustration.

Understanding the Boot Menu vs. BIOS/UEFI

Before diving into the specific steps, it is important to distinguish between the Boot Menu and the BIOS/UEFI Settings screen But it adds up..

  • The Boot Menu (One-Time Boot): This allows you to select a specific device (USB, DVD, Network, Hard Drive) to boot from only for the current session. It does not change the permanent boot priority. This is ideal for installing Windows from a flash drive or running a live Linux environment.
  • BIOS/UEFI Settings: This is the firmware interface where you configure hardware settings, secure boot options, and the permanent boot order. You typically enter this to disable Secure Boot, enable virtualization, or set a hard drive as the primary boot device forever.

Most modern laptops and desktops assign different hotkeys for these two functions. Knowing which key does what for your specific manufacturer is the first step to success.

Method 1: The Shift + Restart Combination (Most Reliable)

Because Windows 10 utilizes "Fast Startup" (a hybrid hibernation state), a standard shutdown does not fully power off the hardware. This often prevents traditional hotkeys (like F12 or F8) from registering during the brief POST (Power-On Self-Test) window. The Shift + Restart method forces a full firmware initialization, guaranteeing access to the advanced startup environment Worth knowing..

  1. Click the Start button and select the Power icon.
  2. Press and hold the Shift key on your keyboard.
  3. While holding Shift, click Restart.
  4. Continue holding Shift until the "Choose an option" screen appears (blue background).
  5. deal with to Troubleshoot > Advanced options > UEFI Firmware Settings.
  6. Click Restart. Your PC will reboot directly into the BIOS/UEFI interface.
  7. Once inside the firmware, look for a "Boot" tab or "Boot Override" section to select your USB drive for a one-time boot, or adjust the Boot Priority Order permanently.

Alternatively, from the "Choose an option" screen in step 4, you can sometimes select Use a device directly if your firmware supports it, allowing you to pick the USB drive without entering the full BIOS menu.

Method 2: Through Windows Settings (GUI Approach)

If you prefer navigating through menus rather than keyboard shortcuts, the Settings app provides a clear path to the Advanced Startup options. This is particularly useful if your keyboard Shift key is malfunctioning or if you are using a touchscreen device.

  1. Press Windows Key + I to open Settings.
  2. Go to Update & Security > Recovery.
  3. Under the Advanced startup header, click the Restart now button.
  4. The system will reboot to the blue "Choose an option" screen.
  5. Follow the path: Troubleshoot > Advanced options > UEFI Firmware Settings > Restart.

This method achieves the exact same result as the Shift + Restart method but is often easier to remember for users who do not use keyboard shortcuts frequently.

Method 3: Manufacturer-Specific Hotkeys (The "Traditional" Way)

If you can catch the POST screen—the brief flash of the manufacturer logo before Windows loads—you can often enter the Boot Menu or BIOS directly using a specific function key. Timing is critical here. You must press the key repeatedly (tap, don't hold) the moment you press the power button.

Because Fast Startup interferes with this, perform a full shutdown first:

    1. Because of that, open Command Prompt as Administrator. And type shutdown /s /f /t 0 and press Enter. This forces a complete cold boot.

Common Hotkeys by Manufacturer

Manufacturer Boot Menu Key (One-Time) BIOS/UEFI Setup Key
Dell F12 F2
HP F9 (or Esc then F9) F10 (or Esc then F10)
Lenovo F12 (or Fn+F12) F1 (or Fn+F1) / Novo Button (pinhole)
ASUS F8 F2 / Del
Acer F12 (Must enable in BIOS first) F2 / Del
MSI F11 Del
Gigabyte F12 Del
Samsung F10 F2
Toshiba F12 F2
Microsoft Surface Volume Down + Power Volume Up + Power

Important Note for Laptops: On many modern ultrabooks, the Function keys (F1-F12) control media/brightness by default. You may need to press Fn + [Function Key] (e.g., Fn + F12) to send the actual F12 signal to the firmware. Check for a "Fn Lock" key (often on Esc or Caps Lock) to toggle this behavior Simple, but easy to overlook. But it adds up..

Method 4: Command Line Shortcut (For Power Users)

If you are already working in a terminal environment (Command Prompt, PowerShell, or Windows Terminal), you can trigger the Advanced Startup menu instantly with a single command. This is faster than navigating menus if you have the window open Most people skip this — try not to..

  1. Open Command Prompt or PowerShell (Standard user rights are fine).
  2. Type the following command and press Enter: shutdown /r /o /f /t 00
    • /r = Restart
    • /o = Boot to Advanced Startup Options Menu
    • /f = Force close running apps
    • /t 00 = Immediate timeout (0 seconds)
  3. The system will log you off and reboot directly to the "Choose an option" screen.
  4. Proceed to Troubleshoot > Advanced options > UEFI Firmware Settings > Restart.

Method 5: The "Novo Button" (Lenovo Specific)

Many Lenovo laptops (ThinkPad, IdeaPad, Yoga) feature a physical Novo Button—a small pinhole usually located near the power jack or on the side chassis. This is a hardware-level interrupt that works even if the OS is corrupted or the drive has failed Small thing, real impact..

Most guides skip this. Don't The details matter here..

  1. Ensure the laptop is completely powered off (not sleeping/hibernating).
  2. Use a paperclip or SIM ejector tool to press the pinhole button gently.
  3. The laptop will power on automatically and display the Novo Button Menu.
  4. Use arrow keys to select Boot Menu (for one-time boot) or BIOS Setup / System Recovery.

Troubleshooting: Why Can't I Enter the Boot Menu?

If you have tried the methods above and still boot straight into Windows, check these common culprits:

1. Fast Startup is Enabled (The #1 Cause)

Fast Startup

Troubleshooting: Why Can’t I Enter the Boot Menu?
(Continuing from “Fast Startup …”)

1. Fast Startup Is Enabled (The #1 Cause)

Modern Windows versions automatically save your desktop environment to a hidden partition so that a reboot starts up faster. When this option is turned on, the system often bypasses the traditional boot‑menu screen and launches straight into Windows, making it look like you’re already in the OS rather than seeing the “Choose an option” prompt.

How to verify:

  • Open a Command Prompt (cmd.exe or PowerShell). Run shutdown /r /o /f /t 0 – if you see the terminal immediately reopening the GUI instead of waiting for the Advanced Startup window, Fast Startup is active.

How to disable:

Method Steps
Windows Settings (most reliable) 1. Practically speaking, <br>3. Under Advanced power settings, check “Turn on fast startup” and then click Change plan settings.
Command Line powershell<br>Set-ItemProperty -Path 'HKCU:\Software\Microsoft\Windows\CurrentVersion\Policies\System' -Name 'StartupType' -Value 2<br>(This forces Windows to treat the machine as a non‑fast‑startup session.Right‑click the Start button → Device Manager → expand Power Options. Click Change plan settings → move the “Recovery” tab to the bottom. That said, <br>2. Think about it: <br>4. Uncheck the box next to Turn on fast startup and confirm. )
Registry Edit figure out to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Policy and remove the value EnableFastStartup (or change its DWORD to 0).

After disabling Fast Startup, repeat one of the quick‑restart commands below (Method 4 or Method 5). You should now be prompted for the Advanced Startup / Troubleshoot dialog before Windows loads.


2. Other Common Blocking Causes

Issue What to Check Fix
Secure Boot / UEFI If Secure Boot is enabled and you haven’t installed a compatible GPUBoot, Windows may reset to a fresh installation prompt. Disable Secure Boot temporarily (msconfig → Computer → Advanced → Secure Boot) to test the boot flow. Consider this:
GRUB Bootloader Some laptops ship with a custom GRUB entry. Day to day, look in the BIOS/UEFI settings under Boot → GRUB → Advanced and delete any custom entries.
Corrupted System Files A failed recovery attempt or malware infection can leave the OS in a bad state, forcing a manual boot. Run the built‑in Synthesis tool or restore from a known good backup.
Enterprise Managed Startup In corporate environments, MDM may block the “Choose an option” screen. Contact IT or run the admin’s provisioning script.

This is where a lot of people lose the thread.

sends the system into a raw hardware diagnostic loop or halts at a black screen with a blinking cursor. | Run the manufacturer’s built‑in diagnostics (usually F2, F10, or F12 at power‑on). Reseat or replace the drive cable, test the drive on another machine, or clone to a known‑good SSD.


3. Quick‑Restart Commands (Methods 4 & 5)

If you’ve addressed the blockers above but still need a reliable way to summon the Advanced Startup menu, use one of these one‑liners. They work from a standard Command Prompt, PowerShell, or the Run dialog (Win + R).

Method Command When to Use
4. And msconfig “Diagnostic startup” toggle 1. Day to day,
**6. OK → Restart.<br>4. <br>2. That's why Useful when the GUI is partially broken but you can still reach the Run dialog. Here's the thing —
5. Once in Safe Mode, open msconfig again, uncheck Safe boot, OK, restart. Boot tab → check Safe boot → select Minimal.shutdown with /o shutdown /r /o /f /t 0 Best for scripting or when you’re already in a full Windows session. And press Win + R, type msconfig, hit Enter. Here's the thing — the /o flag tells Windows to boot to the Advanced Startup Options menu on the next restart. Recovery Drive / Installation Media**

You'll probably want to bookmark this section.

Tip: After running Method 4, you’ll see the “Choose an option” screen. Select Troubleshoot → Advanced options to reach Startup Repair, Command Prompt, UEFI Firmware Settings, System Restore, or Startup Settings (for Safe Mode) Simple as that..


4. Verification Checklist

Before you assume the environment is fixed, confirm each of the following:

  • [ ] Fast Startup is disabled (Control Panel → Power Options → Choose what the power buttons do → Change settings that are currently unavailable → uncheck Turn on fast startup).
  • [ ] Secure Boot is either disabled or you have a signed bootloader that satisfies it.
  • [ ] No stray GRUB / rEFInd entries remain in the UEFI boot order.
  • [ ] sfc /scannow and DISM /Online /Cleanup-Image /RestoreHealth report “No component store corruption detected.”
  • [ ] The BCD is healthy (bcdedit /enum shows a valid {current} entry with recoveryenabled Yes).
  • [ ] A recovery drive or installation media is tested and boots to the Troubleshoot screen on this hardware.

If every box is ticked and the Advanced Startup menu still refuses to appear, the issue is almost certainly firmware‑level (BIOS/UEFI bug, NVMe controller quirk, or a locked-down OEM recovery partition). In that case, check the vendor’s support site for a BIOS update or a “Recovery Media Creation” tool specific to your model.


Conclusion

Getting Windows to show the Advanced Startup / Troubleshoot dialog is rarely a single‑step fix—it’s a process of elimination. Then move outward: verify UEFI settings (Secure Boot, custom bootloaders), repair system integrity, and rule out management policies or failing hardware. Start by killing Fast Startup, the most common culprit that silently hijacks the boot path. Keep the quick‑restart commands (shutdown /r /o /f /t 0 and the msconfig Safe Boot toggle) in your toolkit; they turn a frustrating trial‑and‑error reboot cycle into a deterministic, scriptable action.

Worth pausing on this one.

Once the “Choose an option” screen appears reliably, you regain full access to Startup Repair, System Restore, Command Prompt, and the UEFI

Once the “Choose an option” screen finally materializes, you can make use of the full suite of recovery tools that Windows provides. Now, startup Repair will automatically scan the boot configuration data, replace missing files, and attempt to fix any misconfigured entries that prevent normal startup. If the repair routine reports success but the system still refuses to boot, System Restore lets you roll back to a previous snapshot when the OS was healthy, effectively undoing recent changes that may have triggered the problem.

Counterintuitive, but true.

For deeper diagnostics, open the Command Prompt from the same menu. Day to day, from there you can run bcdedit /export C:\bcdBackup to archive the current boot configuration, then use bcdedit /import or bcdedit /set commands to correct specific parameters such as the path to the Windows loader or the recoveryenabled flag. The sfc /scannow and DISM /Online /Cleanup-Image /RestoreHealth utilities can be executed offline to repair corrupted system files that might otherwise block the boot process Surprisingly effective..

If the firmware layer is the root cause—evidenced by a missing entry in the UEFI boot list or an inability to launch the recovery environment despite a healthy OS—enter the firmware setup (usually by pressing Del, F2, or Esc during POST). Verify that the Windows Boot Manager is listed as the primary boot device, that Secure Boot is configured appropriately for your scenario, and that any third‑party bootloaders have been removed or properly signed. Some OEMs lock the recovery partition; in those cases, consult the manufacturer’s documentation for a dedicated recovery‑media creation tool or a BIOS update that restores default boot behavior Easy to understand, harder to ignore..

Not obvious, but once you see it — you'll see it everywhere.

With these options at hand, you can methodically eliminate each potential failure point, from software corruption to hardware incompatibility. When the recovery environment is consistently reachable, you have regained control over the system’s boot pathway and can proceed with any needed repairs, reinstallations, or migrations without the endless reboot loop that originally stalled progress.

Conclusion
Achieving reliable access to the Advanced Startup/Troubleshoot menu is the cornerstone of diagnosing and resolving boot‑related issues in Windows. By systematically disabling Fast Startup, confirming UEFI settings, repairing system files, and, when necessary, updating firmware or using OEM‑specific recovery utilities, you transform a chaotic series of failed boots into a deterministic troubleshooting workflow. Once the “Choose an option” screen appears consistently, the full range of recovery tools becomes available, allowing you to restore, repair, or reset the operating system with confidence.

Just Shared

Fresh Out

You Might Like

See More Like This

Thank you for reading about How To Enter Boot Menu Windows 10. We hope the information has been useful. Feel free to contact us if you have any questions. See you next time — don't forget to bookmark!
⌂ Back to Home