How To Install Anydesk On Ubuntu

3 min read

How to Install AnyDesk on Ubuntu: A Complete Step-by-Step Guide

Installing AnyDesk on Ubuntu is one of the fastest ways to give yourself remote access to a Linux desktop, whether you are supporting a family member across the country, managing an office workstation from home, or controlling a headless server in a closet. AnyDesk is a lightweight remote desktop application that works on Ubuntu 24.04 LTS, 22.Also, 04 LTS, and 20. 04 LTS, and it can be installed in under five minutes using either a graphical installer or three commands in the terminal. This guide walks through every supported method, explains how to enable unattended access, and covers the Wayland screen-sharing issue that trips up most new Ubuntu users.

Not obvious, but once you see it — you'll see it everywhere.

What Is AnyDesk and Why Use It on Ubuntu?

AnyDesk is a proprietary remote desktop tool that uses the DeskRT video codec to deliver smooth, low-latency screen sharing even on weak internet connections. Unlike VNC, which requires port forwarding and often needs a tunnel, AnyDesk connects through the vendor's relay network, so it usually works behind NAT, VPNs, and corporate firewalls without extra configuration Most people skip this — try not to..

Key reasons Ubuntu users choose it:

  • Cross-platform support — connect from Windows, macOS, Android, iOS, or another Linux machine.
  • Low bandwidth usage — usable on mobile hotspots and 3G connections.
  • File transfer and clipboard sync built into the client.
  • Unattended access for machines nobody is sitting in front of.
  • Small footprint — the installed package is roughly 10–15 MB.

Before You Start: Requirements and Preparation

Confirm a few things first so the installation goes smoothly:

  1. A 64-bit system. AnyDesk dropped 32-bit (i386) support years ago. Check with uname -m — you should see x86_64.
  2. An active internet connection during installation, since dependencies are fetched from Ubuntu repositories.
  3. Administrator rights. Every method below needs sudo.
  4. A desktop environment. AnyDesk is a GUI application; a plain server install without a display manager will need the --service mode described later.

It is also worth updating your package index first:

sudo apt update && sudo apt upgrade -y

Method 1: Install AnyDesk Using the Graphical .deb Installer

It's the most beginner-friendly route and works on any Ubuntu flavour Still holds up..

  1. Open Firefox (or your browser of choice) and go to the official AnyDesk download page for Linux.
  2. Download the Debian/Ubuntu 64-bit .deb file. It will be named something like anydesk_6.3.2-1_amd64.deb.
  3. Open Files, figure out to your Downloads folder, and double-click the package.
  4. The Ubuntu Software window opens. Click Install and enter your password when prompted.
  5. Wait for the progress bar to finish, then launch AnyDesk from the Activities overview.

If Ubuntu Software reports a dependency error, close it and run the fix command in Method 2.

Method 2: Install AnyDesk From the Terminal

The terminal method is faster and gives you clearer error messages. Replace the filename with the exact version you downloaded.

cd ~/Downloads
sudo

```bash
apt install ./anydesk_6.3.2-1_amd64.deb

If apt complains that the file cannot be found, confirm you are in the correct directory with ls and make sure the filename matches exactly. Also, the leading . / is important: it tells apt to install a local package rather than search the repositories for a package named anydesk.

When the install finishes, verify it:

anydesk --version

Then launch the client:

anydesk

For most desktop users, that is all that

Just Added

Just Finished

For You

Covering Similar Ground

Thank you for reading about How To Install Anydesk On Ubuntu. We hope the information has been useful. Feel free to contact us if you have any questions. See you next time — don't forget to bookmark!
⌂ Back to Home